DC floor fan is an energy-saving, simulated natural wind, noiseless, no wind pressure DC cooling fan. It consists of a combination of rotor, stator, fan blades, fan frame and other auxiliary components. The control circuit includes semiconductor components and ICs, the output speed signal is in the form of pulse, which can display the real speed through the data bus, and real-time monitoring of the fan speed is realized through the monitoring sensor.
The DC floor fan is used in the temperature range of -10-+70 degrees, and the smart module of the fan can be used with other smart homes to realize perfect closed-loop control. It has a service life of up to 40,000-60,000 hours and needs to be maintained on time to extend its service life. Specific methods include: immediately stopping the machine for inspection when abnormalities are found during operation, avoiding moisture and bumping, ensuring sufficient and stable power supply, keeping the use environment tidy, and supplementing or replacing grease from time to time.
The advantages of DC floor fan include:
1. energy saving: DC floor fans use DC power supply, you can control the fan speed by adjusting the voltage and current, thus realizing the effect of energy saving.
2. Simulation of natural wind: DC floor fans can simulate the flow of natural wind, allowing users to feel a more comfortable cooling experience.
3. No noise: DC floor fan adopts DC motor, which makes less noise during operation and does not cause interference to users.
4. No wind pressure: DC floor fan adopts DC motor, which can provide stable wind power, and will not cause wind pressure to the user.
5. Intelligent control: DC floor fan can be supported through the body of the physical buttons to switch between direct and natural wind modes, the highest wind distance up to 14 meters, support for 140 ° angle of the oscillating head blowing.
In short, DC floor fan is a kind of energy-saving, simulated natural wind, no noise, no wind pressure DC cooling fan, with good experience and energy saving effect.
The engine, gearbox and other parts of a car generate a lot of heat when they work, and cooling fans are used in the cooling system of a car to keep the engine running properly.
Some medical devices also require cooling fans to help dissipate heat when in operation and keep the device in proper working order.
Computer's CPU, graphics card, motherboard and other hardware will generate a lot of heat when running under high load, cooling fans are widely used inside the computer to help emit heat and ensure the norm...
Home appliance cooling fans are used in a wide range of applications, including TVs, computers, stereos, refrigerators, air conditioners and other various electrical devices. When using home appliance cooling f...
Title: The Application Prospects of Intelligent Regulation of Cooling Fans in Smart Homes Introduction: With the rapid development of technology and the increasing demand for comfort and convenience in people's daily lives, smart homes have become a popular trend. One of the key components in ensuring a comfortable living environment is temperature regulation. In this regard, intelligent regulation of cooling fans plays a significant role in smart homes. This article aims to explore the application prospects of intelligent regulation of cooling fans in smart homes. Background: In recent years, the concept of smart homes has gained significant attention from the public. A smart home is a residence that is equipped with electronic devices that can automate and control various home systems,...
Title: How to Improve the Heat Dissipation Efficiency of the Cooling Fan Used in the Water Cooling System Hey there, tech enthusiasts! Do you often find yourself fiddling with your computer's settings, trying to get the perfect balance between performance and heat dissipation? If so, you're in the right place. Today, we're going to discuss how to improve the heat dissipation efficiency of the cooling fan used in the water cooling system. Buckle up, because we're about to dive into some serious cooling knowledge. Before we delve into the nitty-gritty of improving heat dissipation, let's first understand what role the cooling fan plays in the water cooling system. The cooling fan is a crucial component that helps move heat away from the CPU, GPU, or other heat-generating components. This p...
Axial fans working at high temperatures can have a very serious impact on the machine, this is because axial fan wear is mainly caused by dust wear, irrational operation and excessive fan speeds. In high temperature environments, where fans run at double the speed, axial fan wear may increase threefold.First, high temperatures cause the axial fan's lubricant to evaporate, which expands the parts, increases friction, and increases coil resistance, affecting heat dissipation and longevity. This can lead to unbalanced rotation of the axial fan, affecting heat dissipation and longevity.Secondly, high temperatures can damage axial fan bearings, blades and motors, leading to fan vibration, shorter life and failure to function properly. This is due to the damage caused to the axial fan's ...
Title: Characteristics and Application Scenarios of Different Types of Cooling Fans Introduction: Cooling fans are an essential component in many industrial and commercial applications, providing efficient cooling solutions to various systems. The market offers a wide range of cooling fans, each with its unique characteristics and application scenarios. In this article, we will discuss the main types of cooling fans, their features, and suitable application scenarios to help you make an informed decision when selecting a cooling fan for your specific needs. 1. Axial Fans Characteristics: Axial fans are the most common type of cooling fans, featuring a straight-bladed design that pushes air in a linear or axial direction. They are available in various sizes and shapes, with the most comm...
A blower is a mechanical device that is used to transport air from one place to another by means of a mechanical device. There are many different types of blowers, including Roots blowers, centrifugal blowers, rotary blowers, and axial flow blowers, each of which has its own unique working principles and uses.The Roots blower is a fixed volume blower whose air volume is proportional to the number of revolutions, and is widely used in various industries, such as petrochemical, electric power, metallurgy, food and pharmaceutical, and cement and building materials, because of its high mechanical strength, low noise, and low vibration. It provides sufficient gas power for enterprises through its unique working principle and structural characteristics.The centrifugal blower is a constant pressu...
Computer cooling fans are an important part of your computer, they are effective in reducing the temperature of your computer and extending its life. However, as the computer use time increases, the cooling fan may slow down or even stop, resulting in overheating of the computer, or even damage to the hardware, at this time, you need to carry out the cooling fan replacement. This article will introduce you to the steps and precautions for replacing the computer cooling fan.1. Preparation: Before replacing the cooling fan, you should first prepare a new cooling fan, screwdriver, pliers and other tools. At the same time, make sure the computer has been turned off and unplugged the power cord.2. Remove the heat sink: Use a screwdriver to remove the screws on the computer's heat sink one b...
We are a Chinese manufacturer specializing in the research and production of cooling fans. We have the most advanced experimental equipment and professional testing equipment, with 150 employees. Our company has passed ISO9001, 14001 management system certification and IATF16949 vehicle specification certification. Our products are distributed all over the world, and we have formed suppliers in several industries including photovoltaic energy storage, communication equipment, 3D printing, automotive, medical equipment, and charging equipment.
In the world of modern electronics and intelligent devices, managing heat isn’t just good practice—it’s essential for performance, safety, and long-term reliability. From high-speed computing to everyday household appliances, thermal regulation lies at the core of operational efficiency.
At the heart of it all?
Whether you’re running a data center, operating medical equipment, or designing next-gen EVs, the right fan makes the difference between uptime and downtime, efficiency and waste. In this article, we’ll break down how our advanced cooling fan solutions are applied across key industries—and what makes them the preferred choice for global manufacturers.
When electronic systems heat up, performance drops and failure risk spikes. Cooling fans combat this by ensuring continuous airflow, preventing overheating, and stabilizing internal temperatures. But not every fan fits every use case. Different industries demand different features—whether it’s waterproofing, low noise, high static pressure, or compact design.
Let’s dive into 10+ core industries and explore how our fans are engineered to solve real-world thermal challenges.
Medical environments demand silent, sterilizable, and highly reliable thermal management. Cooling fans used in diagnostic equipment, ventilators, and imaging systems must run 24/7 without failure.
● CT & MRI systems
● Portable medical devices
● Blood analyzers & incubators
● Prevent thermal shutdowns
● Ensure accurate, stable performance
● Avoid noise pollution in clinical spaces
● Low-noise brushless motors
● Anti-bacterial housing options
● UL & ISO13485 compliance
In 3D printing, thermal inconsistencies can ruin an entire build. Cooling fans are essential for nozzle temperature control, bed cooling, and motherboard ventilation.
● Hotend cooling
● Stepper motor ventilation
● Control board heat dissipation
● Avoid filament jams and heat creep
● Maintain precise layer bonding
● Keep electronics from overheating
● PWM speed control
● Compact size (25–60mm)
● Low vibration and high airflow balance
Telecommunication infrastructure runs 24/7. Whether in cell towers, base stations, or server racks, heat is a constant threat to uptime.
● Power supplies
● Signal repeaters
● Network switches
● Overheating during peak load
● Dust accumulation in outdoor systems
● Noise limitations in enclosed cabinets
● IP55–IP67 waterproofing
● Long-life ball or fluid dynamic bearings
● Remote fan failure alarm systems
Modern vehicles are rolling computers. From ADAS systems to battery packs, every module requires targeted thermal control.
● Battery cooling for EVs
● ECU, inverters, onboard chargers
● Infotainment and display modules
● Prevent thermal runaway in battery packs
● Stabilize ECU under high-speed loads
● Reduce component failure rate in high-temp zones
● IATF16949 automotive standard compliance
● Vibration-resistant fan structures
● Custom airflow tuning via PWM/FG control
Factories, plants, and automation lines run on logic controllers, sensors, and motors—each generating serious heat. Our cooling fans are built to thrive in harsh, dusty, and high-load environments.
● Control cabinets
● IGBT power modules
● PLC and HMI panels
● Keeps logic systems stable in extreme conditions
● Prevents shutdowns due to heat overload
● Withstands oil, moisture, and contaminants
● IP-rated casings
● Filter-friendly design
● 24/7 duty-cycle durability
From ovens to purifiers, modern appliances are smarter—but also hotter. Thermal regulation ensures they remain safe, effective, and user-friendly.
● Refrigerator compressors
● Microwave venting systems
● Convection ovens & air purifiers
● Silent airflow for user comfort
● Prevent overheating damage to internal boards
● Extend appliance lifespan
● Ultra-quiet fans (<18 dBA)
● Heat-resistant thermoplastic blades
● Eco-friendly low-power models
BMS (Battery Management Systems) and solar inverters must operate efficiently—often in outdoor conditions with intense sun exposure. Active cooling is a must.
● Lithium battery modules
● Hybrid solar inverters
● Off-grid energy boxes
● Avoid battery swelling and overheating
● Keep power conversion components stable
● Prevent system failure during peak sunlight hours
● Wide voltage (5V/12V/24V/48V)
● DC brushless fan motors
● High air volume, low power draw
In avionics and aerospace systems, thermal control can mean mission success or failure. Cooling solutions must withstand pressure changes, vibrations, and limited airflow.
● In-flight entertainment systems
● Avionics cooling modules
● Satellite communication units
● Support temperature-sensitive circuits
● Prevent premature component failure
● Maintain operational safety at altitude
● Aerospace-grade materials
● Extreme-temperature resilience (-40°C to 85°C)
● Lightweight, shock-resistant design
Even in compact wearables or IoT hubs, heat management affects user comfort and device reliability.
● Mini cooling in AR/VR headsets
● IoT sensor hubs
● Smart home control units
● Heat buildup in confined spaces
● Performance lag from thermal throttling
● Maintaining ambient-friendly noise levels
● Micro fans (as small as 20mm)
● Ultra-slim profiles (<10mm)
● Near-silent operation
Cordless tools and power systems generate high amounts of heat. Thermal failure can result in fire hazards or permanent equipment damage.
● Brushless motors
● Battery packs
● Digital control interfaces
● Battery thermal runaway
● Motor coil overheating
● Component wear from excessive temps
● High static pressure output
● Ruggedized housing
● Dust- and water-resistant (IP65)
To get the most out of your cooling system, regular maintenance is crucial:
✅ Clean the Blades: Dust build-up restricts airflow and raises noise
✅ Check for Vibration: Excess movement signals bearing wear
✅ Monitor RPMs: A drop in RPM can signal motor issues
✅ Replace Every 24–36 Months: Especially in continuous use environments
We’re more than just a cooling fan manufacturer—we’re a thermal solutions partner. With over 150 employees, advanced R&D labs, and full ISO9001, ISO14001, and IATF16949 certification, we engineer fans tailored for real-world challenges.
● Full size range (20mm to 172mm) AC/DC
● Custom solutions: waterproof, dustproof, ultra-silent, high airflow
● Global shipping and OEM/ODM support
● Fans for every sector: industrial, automotive, energy, consumer electronics, and more
As a high-quality cooling device, the low-power cooling fan offers a variety of advantages, such as lowering operating costs, improving operational efficiency, extending the life of equipment, and reducing ener...
Centrifugal fans are an air-powered mechanical device widely used in a variety of industrial facilities. The following is a common application method, which enables centrifugal fans to realize automation contro...
Axial fans are a common type of fan, mainly used in places such as ventilation and chillers. Because of its simple structure but high data requirements and the ability to transport explosive, volatile and corro...
Axial fan is a device that utilizes the principle of air flow and heat exchange to produce heat, which is mainly used to rapidly increase the indoor temperature and maintain the humidity balance. It is widely u...
Crossflow fans and vertical fans are two different types of fans with different characteristics and application scenarios. The following is a brief comparison of these two types of fans:1. Different constructio...
The crossflow fan is an industrial fan widely used in air purifiers, air conditioners, air curtain equipment, dryers, hairdryers, home appliances, and grain combines. It produces an axial flow velocity between ...
